AJ-1000 Flow Injection Analyzer


The instrument is designed for the determination of cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate / nitrite, hexavalent chromium and other ingredients in surface water, groundwater, drinking water and environmental water.


-Fully automatic multi-channel analysis, the workstation software can run up to 8 channels simultaneously. The analysis method is easy and fast to change; the entire analysis process is completed automatically without manual operations;
-Peristaltic pump: 12-channel integral gland peristaltic pump, pump speed can be programmed between 1-100 rpm;
-Auto sampling system: polar-coordinate auto sampling system, with 162 positions for sample tube, cell for needle washing and 2 large cells for cleansing liquid, to meet the needs of large sample volume analysis;
-Super long life-time LED light source up to tens of thousands of hours. High-sensitivity blue-light enhanced photo detector, and the wavelength range is 340nm-1100nm;
-High-precision A/D converter, the detection dynamic range is not less than 3 orders;
-Diluter: It can automatically make standard solutions for calibration curve and online dilution of out-of-range samples with a dilution factor of 1.5-10000 times;
-Reagent dosage: 10ug-100ug depending on the method;
-Response Time: each method is different, the fastest is 120 samples / hour.


Linear range: 0.01 -2mg / L (based on P);
MDL: <0.005 mg / L (based on P);
Response Time: 30 samples / hour;
Precision: <1.0%;
Note: the specifications will vary on the measured substances.

Follow us on Wechat

  • Headquarter Shanghai
  • Tel:400-832-8801
  • Fax:021-36212790
  • Email:service@anjie.net.cn
  • Contact:Mr. Liu